CUSTOM TANK EXTRAS

Index
1 2 3 4 5 6 7 8 9 10 11 12
Contact Us  english website hansontank.com/
(THE FOLLOWING TANK SUPPORTS ARE DESIGNED FOR SEISMIC CONDITIONS)
ANGLE LEGS – 4″ or 6″ High.
(Please specify when ordering. Angles and base plates are sized to suit.)
(3 legs okay to 360 gallons, use 4 on larger.)
BLACKGALVANIZED (TANK)
12″ thru 36″ diameter – each legInquireInquire
     42″ thru 48″ diameterInquireInquire
     54″ thru 60″ diameterInquireN/A
     64″ thru 78″ diameterInquireN/A
     84″ thru 96″ diameterInquireN/A
RING BASE – 6″ High (To 60″ dia. only. Please inquire for larger sizes)
Ring Base with angle clips – per diameter inch of base skirtInquireInquire
Ring Base with base plate – per diameter inch of base skirtInquireInquire
LOOSE SADDLES or WELDED FEET (6″ High Both)
(See page WT-7 for prices, page WT-2 for illustration (feet)
Loose Saddles can be attached to steel plates welded radially to the tank for seismic restraint.
Add price for pair of saddles – (required when horizontal tank is insulated by Hanson) – see page WT-7 for illustration
Inquire per dia. inch(see page 7)
INSULATION, ETC.
Inorganic Zinc Prime (upgrade from standard shop primer)
per sq. ft. InquireN/A
Polyurethane foam, R-16 with waterproof topcoatper sq. ft. InquireN/A
To increase “R” value by one
(e.g.R-20 = Inquire per sq. ft.)
per sq. ft. InquireN/A
Fiberglass with metal jacketper sq. ft. InquireN/A
(2″ fiberglass, with .02 aluminum jacket – R8 value) To increase “R” value by 4 – R12per sq. ft. InquireN/A
Important: Jacketed tanks require protective skidding and special shipping arrangements. Please add for skidding and a surcharge of Inquire per pound of tank weight for extra freight. Vertical tanks must also have 4 lift lugs installed.(See below).
Vertical tanks over 107″ total height will also be surcharged. Please call for a quote.
SKIDDING
For protection and handling.Required on all tanks except Hanson delivered or will call. (Inquire list minimum)
per sq. ft. InquireN/A
Crating and/or loading a container or flat rack for ocean shipment is extra.Inquire
LIFT LUGS (each)
Lifting capacity: up to 2,400#
InquireN/A
Lifting capacity: up to 6,000#InquireN/A
Lifting capacity: up to 11,000#InquireN/A
Lifting capacity: up to 18,000#InquireN/A
SPECIAL OPENINGS
3″ FNPT connection upgrade, each
InquireN/A
4″ FNPT connection upgrade, eachInquireN/A
4″ x 6″ handhole – eachInquireN/A
6″ x 8″ handhole – eachInquireN/A
11″ x 15″ manhole – included on some tanks – see page WT-4 for detailsInquireN/A
12″ x 16″ manhole – use difference of 11″ x 15″ and 12″ x 16″ if manhole is in base priceInquireN/A
14″ x 18″ manhole – use difference of 11″ x 15″ and 14″ x 18″ if manhole is in base priceInquireN/A
150# A.N.S.I. FLANGES (Refer to page WT-10 for minimum distances from girth seams)All Carbon Steelw/Stainless Steel Collar
(Mandatory on Glass and Cement Lined Tanks)
2.5″ or less nominal pipe size, 24″ thru 120″ diameter tanksInquireInquire
3″ nominal pipe size, 24″ thru 120″ diameter tanksInquireInquire
4″ nominal pipe size, 36″ thru 120″ diameter tanksInquireInquire
6″ nominal pipe size, 42″ thru 120″ diameter tanksInquireInquire
8″ nominal pipe size, 48″ thru 120″ diameter tanksInquireInquire
10″ nominal pipe size, 54″ thru 120″ diameter tanksInquireInquire
12″ nominal pipe size, 54″ thru 120″ diameter tanksInquireInquire
14″ nominal pipe size, 54″ thru 120″ diameter tanksInquireInquire
UPGRADED THREADED CONNECTIONSStainless SteelExtended*
0.25″, .5″, .75″, 1″InquireInquire
1.25″InquireInquire
1.50″InquireInquire
2.00″InquireInquire
2.50″InquireInquire
3.00″InquireInquire
*Designed to extend past insulation. Carbon steel minimum 2000# rated. Recommended for top connection on outdoor insulated tanks.
CEMENT LINED TANKS
(Lining is .75″ thick over wire mesh, tank weight increases by 5# per square foot.)
If stainless steel connections are specified, add per above.
If shipped by common carrier, Vertical Cement lined tanks must be skidded for shipment. (See above.)