HOT WATER STORAGE TANKS
STANDARD VERTICAL CEMENT LINED

MOST OF OUR TANKS CAN ALSO BE BUILT IN STAINLESS STEEL USING IN-STOCK MATERIAL – PLEASE INQUIRE

 

NON-STOCK TANKS ARE BUILT TO ORDER IN 3 – 4 WEEKS
Vertical Water Tanks
IMPORTANT: Operating temperatur rating 210 ºF maximum.
Cement lining adds 5 lbs/ft2 to the shipping weight.
STANDARD HOT WATER TANKS
TECHNICAL SPECIFICATIONS

These Hanson lined potable hot water storage tanks are built and tested in accordance with the A.S.M.E. Boiler and Pressure Vessel Code Section IV for potable hot water storage tanks and bear the “HLW” stamp, and serial number, national board number as required. A copy of the A.S.M.E. data sheet HLW-6, signed by an A.S.M.E. authorized inspector, will be sent with the invoice if requested at time of order.

Standard exterior paint system is power buff to SSPC-SP3 plus one coat 2/3 MIL DFT rust resistant primer. Standard interior finishes are porcelain enamel, aka “GLASS”, epoxy or cement.

All tappings and flange openings are plugged and covered before shipment. Manway covers are installed for shipping only, and must be adjusted and tightened before the tank is pressurized.

Sacrificial magnesium alloy anodes are shipped loose with all glass lined tanks for installation at the jobsite. These must be checked periodically in service and replaced if necessary to protect the tank lining.

The A.S.M.E. name plate and the supplied lift lugs are installed to allow clearance for tank insulation, which is available at extra cost.

Water storage tanks are guaranteed free from defects in material and workmanship for one year from the date of shipment, FOB our factory. Full limited warranty terms are available on request.

GALLSSIZEWT#SQ.FTDRAWING / PART#NET PRICEFOAM INSULORDER NOW
JPG formatPDF format
30536″ x 77″1023#65CS-36-305-VCS-36-305-V$ 6,584.00$ 862.00CS-36-305-V
33536″ x 84″1098#71CS-36-335-VCS-36-335-V$ 6,899.00$ 922.00CS-36-335-V
36036″ x 88″1145#74CS-36-360-VCS-36-360-V$ ENQUIRE$ 957.00GET QUOTE
40036″ x 99″1394#99CS-36-400-VCS-36-400-V$ 7,524.00$ 1,256.00CS-36-400-V
46036″ x 113″1472#94CS-36-460-VCS-36-460-V$ 8,397.00$ 1,079.00CS-42-460-V
46242″ x 84″1450#83CS-42-462-VCS-42-462-V$ 8,133.00$ 1,079.00CS-42-462-V
53442″ x 96″1558#94CS-42-534-VCS-42-534-V$ 8,787.00$ 1,208.00CS-42-534-V
66042″ x 120″1898#116CS-42-660-VCS-42-660-V$ 10,065.00$ 1,443.00CS-42-660-V
58548″ x 83″1695#95CS-48-585-VCS-48-585-V$ 10,053.00$ 1,436.00CS-48-585-V
71248″ x 100″1986#113CS-48-712-VCS-48-712-V$ 11,112.00$ 1,436.00CS-48-712-V
80048″ x 111″2171#125CS-48-800-VCS-48-800-V$ 11,798.00$ 1,569.00CS-48-800-V
90048″ x 122″2384#137CS-48-900-VCS-48-900-V$ 12,730.00$ 1,698.00CS-48-900-V
104054″ x 115″2813#146CS-54-1040-VCS-54-1040-V$ 13,997.00$ 1,825.00CS-54-1040-V
122556″ x 127″2993#166CS-56-1225-VCS-56-1225-V$ 17,021.00$ 2,050.00CS-56-1225-V
145060″ x 130″3419#185CS-60-1450-VCS-60-1450-V$ 18,270.00$ 2,277.00CS-60-1450-V
165064″ x 130″3764#197CS-64-1650-VCS-64-1650-V$ 21,226.00$ 2,428.00CS-64-1650-V
195072″ x 123″4205#213CS-72-1950-VCS-72-1950-V$23,872.00$ 2,638.00CS-72-2150-V
215072″ x 135″4543#213CS-72-2150-VCS-72-2150-V$ 24,302.00$ 2,638.00CS-72-2150-V
Standard styles can be modified at nominal cost. The part# will change. If the capacity or working pressure you need is not listed, contact us for a prompt quotation. As well as ASME, we can meet other domestic and international codes such as ABS, USCG, Canadian, Lloyds and DNV.
Due to recent, significant, volatility in the steel market, a surcharge may apply to the prices